{"id":2691,"date":"2026-11-19T14:02:37","date_gmt":"2026-11-19T14:02:37","guid":{"rendered":"https:\/\/www.cmc-texpan.com\/?p=2691"},"modified":"2026-11-19T14:02:48","modified_gmt":"2026-11-19T14:02:48","slug":"panel-production-line","status":"publish","type":"post","link":"https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/","title":{"rendered":"How to optimize a panel production line: a practical guide\u00a0"},"content":{"rendered":"\n<h2 class=\"wp-block-heading\"><strong>Why production line optimisation is a continuous process<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Optimising a wood-based panel production line is not a one-time project \u2014 it is a permanent operational discipline. Raw material quality changes with every delivery. Machinery wears progressively. Market requirements for panel quality evolve. Energy costs fluctuate. Environmental regulations tighten. In this context, the question is not &#8220;is our line optimised?&#8221; but &#8220;what is the gap between our current performance and the best we could achieve with our existing assets?&#8221;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Production line optimisation in a panel plant addresses four primary performance dimensions simultaneously: product quality (board thickness tolerance, internal bond, surface smoothness), material efficiency (resin consumption per m\u00b3, raw wood yield), energy efficiency (electricity and thermal energy per m\u00b3), and equipment availability (hours of actual production versus scheduled production hours).<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Improving any one of these dimensions typically has positive effects on the others. Reducing resin consumption through more precise blending also reduces formaldehyde emissions and press factor. Improving mat forming accuracy reduces sanding waste and increases yield. Better preventive maintenance reduces unplanned downtime and extends machine life. This interconnectedness means that optimisation initiatives should be evaluated for their system-wide impact, not just their effect on a single KPI.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Starting point: establishing a baseline with key performance indicators<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Effective optimisation requires a quantified baseline. Before any changes are made, the current performance of the line must be measured accurately across all four dimensions. Key performance indicators (KPIs) that should be tracked in any wood-based panel plant include:<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><td><strong>KPI<\/strong><\/td><td>Measurement Method and Target<\/td><\/tr><tr><td><strong>Board thickness CV (%)<\/strong><\/td><td>Statistical analysis of caliper measurements; target &lt; 0.5%<\/td><\/tr><tr><td><strong>Internal bond strength (N\/mm\u00b2)<\/strong><\/td><td>Laboratory testing per EN 319; must meet product specification<\/td><\/tr><tr><td><strong>Resin consumption (kg\/m\u00b3)<\/strong><\/td><td>Production records; compare to theoretical minimum<\/td><\/tr><tr><td><strong>Raw wood yield (%)<\/strong><\/td><td>Wood input vs board output; identify loss points<\/td><\/tr><tr><td><strong>Press factor (s\/mm)<\/strong><\/td><td>Production data; compare to press manufacturer target<\/td><\/tr><tr><td><strong>OEE \u2014 Overall Equipment Effectiveness (%)<\/strong><\/td><td>Availability \u00d7 Performance \u00d7 Quality; target &gt; 85%<\/td><\/tr><tr><td><strong>Unplanned downtime (h\/month)<\/strong><\/td><td>Maintenance records by equipment; identify top 3 causes<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Optimisation area 1 \u2014 raw material and cleaning<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Raw material quality is the foundation of production line performance. Variations in raw wood moisture content, chip geometry, contaminant load, and species mix affect every downstream process stage. The most effective raw material optimisation measures are: establishing moisture content targets and monitoring at intake; segregating raw material types with significantly different processing characteristics; and maximising the effectiveness of the cleaning system to protect downstream equipment.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Cleaning system performance should be audited regularly by measuring the contaminant load before and after each cleaning stage. If a gravimetric separator is removing fewer contaminants than expected, it may indicate that the airflow is not calibrated correctly for the current material or that internal wear has changed the classification characteristics. A cleaning system audit identifies which stages are underperforming and where targeted maintenance or adjustment will have the greatest effect.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Optimisation area 2 \u2014 drying<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The dryer is typically the highest energy consumer in a particleboard plant. Optimising dryer performance means achieving the target moisture content for both core and surface layer particles consistently, without over-drying (which wastes energy and can cause fire risk) or under-drying (which degrades blending quality and increases press factor). Continuous moisture measurement at the dryer discharge \u2014 coupled with automatic dryer temperature control \u2014 is the technology foundation of dryer optimisation.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Particle separation after the dryer (fine screening to remove overdried fines before blending) is often overlooked but can significantly reduce resin consumption: overdried fines have a very high specific surface area and absorb disproportionate amounts of resin without contributing to board strength.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Optimisation area 3 \u2014 gluing system<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Resin is typically the largest or second-largest variable cost in particleboard production. Reducing resin consumption by even 0.5% of dry wood weight across a plant producing 200,000 m\u00b3\/year represents a significant annual saving. The primary levers for resin reduction are: accurate particle throughput measurement (belt scale calibration), precise resin dosing control (Coriolis flow meters in the glue kitchen), minimising particle fragmentation in the blender (low-speed blender operation), and maintaining optimal resin viscosity, temperature, and pH.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Our glue kitchen and blender systems are designed specifically to minimise resin consumption without compromising panel quality. The use of Coriolis-type mass flow meters \u2014 which measure true mass flow rather than volume flow \u2014 eliminates the dosing errors caused by resin density variations that volume-based meters cannot detect. This alone typically reduces average resin over-application by 0.5\u20131.5% across the production run.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Optimisation area 4 \u2014 mat forming<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Mat forming optimisation focuses on minimising area weight variation \u2014 both in the machine direction and cross-direction. The primary tools are: closed-loop mat weight control (load cell scales with automatic correction), regular maintenance of forming heads (cleaning, worn element replacement), and calibration of wind speed settings in wind formers.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Upgrading from conventional wind formers to EcoFormer SL technology is the highest-impact single upgrade available for existing particleboard forming stations. The improved airflow uniformity provided by the EcoFormer SL&#8217;s diffuser plate directly reduces cross-directional area weight variation \u2014 the most common forming defect. Plants that have upgraded to EcoFormer SL technology have reported reductions in sanding waste, improvements in board thickness tolerance, and energy savings from smaller fan requirements.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Optimisation area 5 \u2014 press performance<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Press efficiency is measured primarily by the press factor \u2014 seconds of pressing time per millimetre of board thickness. A lower press factor means higher plant throughput at the same board thickness. Press factor is determined by the curing speed of the resin (a chemical variable), the mat moisture content at press entry (determines steam generation inside the mat), and the press temperature and pressure profile.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Upstream optimisation of mat moisture \u2014 precise drying to target moisture content, uniform resin application without over-wetting \u2014 directly reduces press factor. A reduction of 0.5 s\/mm in press factor on a plant producing 200,000 m\u00b3\/year is equivalent to several thousand additional m\u00b3 of production annually.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Optimisation area 6 \u2014 maintenance strategy<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">According to <a href=\"https:\/\/www.advancedtech.com\/blog\/what-is-machine-uptime\/\">research on industrial maintenance<\/a>, unplanned downtime is significantly more costly than planned maintenance \u2014 both in direct repair cost and in lost production. A shift from reactive to preventive (and ultimately predictive) maintenance is one of the highest-return optimisation investments available to panel plant managers.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For wood-based panel plants, the highest-priority preventive maintenance activities are: oscillating screen mesh inspection and replacement (mesh wear progressively degrades particle classification accuracy); belt scale calibration (directly affects resin application accuracy); forming head maintenance (worn rollers cause area weight variation); and blender cleaning (resin build-up on chamber walls reduces effective volume and changes particle retention time).<\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Why our equipment supports production line optimisation<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Our machines are designed with production optimisation as a primary objective \u2014 not just equipment performance in isolation. The EcoFormer SL reduces cross-directional area weight variation. Our gravimetric separators preserve particle geometry while removing contaminants. Our glue kitchen Coriolis meters minimise resin over-application. Our dosing bins with rotary combs provide stable particle feed to the blenders. Each of these design choices contributes to measurable improvements in plant KPIs.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">We also provide modernisation and retrofit services for existing plants \u2014 bringing our latest technology improvements to operating lines without requiring a full plant replacement. Contact us to discuss how our solutions can improve your plant&#8217;s performance, or visit our <a href=\"https:\/\/www.cmc-texpan.com\/en\/products\/\">products page<\/a> for technical details.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>FAQ \u2014 Optimising panel production lines&nbsp;<\/strong><\/h2>\n\n\n\n<div class=\"schema-faq wp-block-yoast-faq-block\"><div class=\"schema-faq-section\" id=\"faq-question-1795096803229\"><strong class=\"schema-faq-question\"><strong>What is OEE and what is a good target for a panel plant?<\/strong><\/strong> <p class=\"schema-faq-answer\">OEE (Overall Equipment Effectiveness) is the product of availability, performance rate, and quality rate. A target of 85%+ is considered world-class for continuous panel production lines.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1795096804248\"><strong class=\"schema-faq-question\"><strong>What is the fastest way to reduce resin consumption without affecting panel quality?<\/strong><\/strong> <p class=\"schema-faq-answer\">The fastest path is accurate belt scale calibration combined with Coriolis mass flow meters in the glue kitchen \u2014 eliminating systematic resin over-application caused by metering inaccuracy.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1795096805056\"><strong class=\"schema-faq-question\"><strong>How does recycled wood content affect production line optimisation?<\/strong><\/strong> <p class=\"schema-faq-answer\">Recycled wood requires more intensive cleaning (more stages), may require different blending parameters (higher resin for lower-quality particles), and can increase press factor variability. A robust cleaning system upstream is the critical prerequisite.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1795096806270\"><strong class=\"schema-faq-question\"><strong>What is the typical return on investment for forming line upgrades?<\/strong><\/strong> <p class=\"schema-faq-answer\">Forming line upgrades (EcoFormer SL, closed-loop weight control) typically achieve payback in 12\u201336 months through reduced sanding waste, improved board quality (fewer rejections), and energy savings.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1795096807758\"><strong class=\"schema-faq-question\"><strong>How can we identify the biggest source of unplanned downtime in our plant?<\/strong><\/strong> <p class=\"schema-faq-answer\">Systematic recording of all downtime events by equipment and cause, over a period of 3\u20136 months, reveals the top downtime contributors (Pareto analysis). In most plants, 20% of equipment causes 80% of unplanned downtime.<\/p> <\/div> <\/div>\n","protected":false},"excerpt":{"rendered":"<p>Why production line optimisation is a continuous process Optimising a wood-based panel production line is not a one-time project \u2014 it is a permanent operational discipline. Raw material quality changes with every delivery. Machinery wears progressively. Market requirements for panel quality evolve. Energy costs fluctuate. Environmental regulations tighten. In this context, the question is not [&hellip;]<\/p>\n","protected":false},"author":2,"featured_media":2694,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"off","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[4,1],"tags":[],"class_list":["post-2691","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-products-news","category-uncategorized"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.3 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>How to optimize a panel production line: a practical guide<\/title>\n<meta name=\"description\" content=\"ptimising a wood-based panel production line is not a one-time project \u2014 it is a permanent operational discipline\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to optimize a panel production line: a practical guide\" \/>\n<meta property=\"og:description\" content=\"ptimising a wood-based panel production line is not a one-time project \u2014 it is a permanent operational discipline\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/\" \/>\n<meta property=\"og:site_name\" content=\"SIEMPELKAMP\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-19T14:02:37+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-11-19T14:02:48+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.cmc-texpan.com\/wp-content\/uploads\/2026\/11\/panel-production-line-scaled.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"2560\" \/>\n\t<meta property=\"og:image:height\" content=\"1920\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Filippo Todeschini\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Filippo Todeschini\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"7 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/2026\\\/11\\\/19\\\/panel-production-line\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/2026\\\/11\\\/19\\\/panel-production-line\\\/\"},\"author\":{\"name\":\"Filippo Todeschini\",\"@id\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/#\\\/schema\\\/person\\\/64ab64b9769b69cc3e640424d1b79007\"},\"headline\":\"How to optimize a panel production line: a practical guide\u00a0\",\"datePublished\":\"2026-11-19T14:02:37+00:00\",\"dateModified\":\"2026-11-19T14:02:48+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/2026\\\/11\\\/19\\\/panel-production-line\\\/\"},\"wordCount\":1390,\"image\":{\"@id\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/2026\\\/11\\\/19\\\/panel-production-line\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.cmc-texpan.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/panel-production-line-scaled.jpg\",\"articleSection\":[\"Products - news\"],\"inLanguage\":\"en-US\"},{\"@type\":[\"WebPage\",\"FAQPage\"],\"@id\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/2026\\\/11\\\/19\\\/panel-production-line\\\/\",\"url\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/2026\\\/11\\\/19\\\/panel-production-line\\\/\",\"name\":\"How to optimize a panel production line: a practical guide\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/2026\\\/11\\\/19\\\/panel-production-line\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/2026\\\/11\\\/19\\\/panel-production-line\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.cmc-texpan.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/panel-production-line-scaled.jpg\",\"datePublished\":\"2026-11-19T14:02:37+00:00\",\"dateModified\":\"2026-11-19T14:02:48+00:00\",\"author\":{\"@id\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/#\\\/schema\\\/person\\\/64ab64b9769b69cc3e640424d1b79007\"},\"description\":\"ptimising a wood-based panel production line is not a one-time project \u2014 it is a permanent operational discipline\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/2026\\\/11\\\/19\\\/panel-production-line\\\/#breadcrumb\"},\"mainEntity\":[{\"@id\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/2026\\\/11\\\/19\\\/panel-production-line\\\/#faq-question-1795096803229\"},{\"@id\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/2026\\\/11\\\/19\\\/panel-production-line\\\/#faq-question-1795096804248\"},{\"@id\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/2026\\\/11\\\/19\\\/panel-production-line\\\/#faq-question-1795096805056\"},{\"@id\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/2026\\\/11\\\/19\\\/panel-production-line\\\/#faq-question-1795096806270\"},{\"@id\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/2026\\\/11\\\/19\\\/panel-production-line\\\/#faq-question-1795096807758\"}],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/2026\\\/11\\\/19\\\/panel-production-line\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/2026\\\/11\\\/19\\\/panel-production-line\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.cmc-texpan.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/panel-production-line-scaled.jpg\",\"contentUrl\":\"https:\\\/\\\/www.cmc-texpan.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/panel-production-line-scaled.jpg\",\"width\":2560,\"height\":1920,\"caption\":\"panel production line\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/2026\\\/11\\\/19\\\/panel-production-line\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How to optimize a panel production line: a practical guide\u00a0\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/#website\",\"url\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/\",\"name\":\"SIEMPELKAMP\",\"description\":\"Sorting &amp; Forming\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/#\\\/schema\\\/person\\\/64ab64b9769b69cc3e640424d1b79007\",\"name\":\"Filippo Todeschini\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/60bb2c3b5f05bd108b4e5284f41bddb9468c708a0dc0c9dfea02da4c921efac7?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/60bb2c3b5f05bd108b4e5284f41bddb9468c708a0dc0c9dfea02da4c921efac7?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/60bb2c3b5f05bd108b4e5284f41bddb9468c708a0dc0c9dfea02da4c921efac7?s=96&d=mm&r=g\",\"caption\":\"Filippo Todeschini\"},\"url\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/author\\\/siempelkamp-staff\\\/\"},{\"@type\":\"Question\",\"@id\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/2026\\\/11\\\/19\\\/panel-production-line\\\/#faq-question-1795096803229\",\"position\":1,\"url\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/2026\\\/11\\\/19\\\/panel-production-line\\\/#faq-question-1795096803229\",\"name\":\"What is OEE and what is a good target for a panel plant?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"OEE (Overall Equipment Effectiveness) is the product of availability, performance rate, and quality rate. A target of 85%+ is considered world-class for continuous panel production lines.\",\"inLanguage\":\"en-US\"},\"inLanguage\":\"en-US\"},{\"@type\":\"Question\",\"@id\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/2026\\\/11\\\/19\\\/panel-production-line\\\/#faq-question-1795096804248\",\"position\":2,\"url\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/2026\\\/11\\\/19\\\/panel-production-line\\\/#faq-question-1795096804248\",\"name\":\"What is the fastest way to reduce resin consumption without affecting panel quality?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The fastest path is accurate belt scale calibration combined with Coriolis mass flow meters in the glue kitchen \u2014 eliminating systematic resin over-application caused by metering inaccuracy.\",\"inLanguage\":\"en-US\"},\"inLanguage\":\"en-US\"},{\"@type\":\"Question\",\"@id\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/2026\\\/11\\\/19\\\/panel-production-line\\\/#faq-question-1795096805056\",\"position\":3,\"url\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/2026\\\/11\\\/19\\\/panel-production-line\\\/#faq-question-1795096805056\",\"name\":\"How does recycled wood content affect production line optimisation?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Recycled wood requires more intensive cleaning (more stages), may require different blending parameters (higher resin for lower-quality particles), and can increase press factor variability. A robust cleaning system upstream is the critical prerequisite.\",\"inLanguage\":\"en-US\"},\"inLanguage\":\"en-US\"},{\"@type\":\"Question\",\"@id\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/2026\\\/11\\\/19\\\/panel-production-line\\\/#faq-question-1795096806270\",\"position\":4,\"url\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/2026\\\/11\\\/19\\\/panel-production-line\\\/#faq-question-1795096806270\",\"name\":\"What is the typical return on investment for forming line upgrades?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Forming line upgrades (EcoFormer SL, closed-loop weight control) typically achieve payback in 12\u201336 months through reduced sanding waste, improved board quality (fewer rejections), and energy savings.\",\"inLanguage\":\"en-US\"},\"inLanguage\":\"en-US\"},{\"@type\":\"Question\",\"@id\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/2026\\\/11\\\/19\\\/panel-production-line\\\/#faq-question-1795096807758\",\"position\":5,\"url\":\"https:\\\/\\\/www.cmc-texpan.com\\\/en\\\/2026\\\/11\\\/19\\\/panel-production-line\\\/#faq-question-1795096807758\",\"name\":\"How can we identify the biggest source of unplanned downtime in our plant?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Systematic recording of all downtime events by equipment and cause, over a period of 3\u20136 months, reveals the top downtime contributors (Pareto analysis). In most plants, 20% of equipment causes 80% of unplanned downtime.\",\"inLanguage\":\"en-US\"},\"inLanguage\":\"en-US\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"How to optimize a panel production line: a practical guide","description":"ptimising a wood-based panel production line is not a one-time project \u2014 it is a permanent operational discipline","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/","og_locale":"en_US","og_type":"article","og_title":"How to optimize a panel production line: a practical guide","og_description":"ptimising a wood-based panel production line is not a one-time project \u2014 it is a permanent operational discipline","og_url":"https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/","og_site_name":"SIEMPELKAMP","article_published_time":"2026-11-19T14:02:37+00:00","article_modified_time":"2026-11-19T14:02:48+00:00","og_image":[{"width":2560,"height":1920,"url":"https:\/\/www.cmc-texpan.com\/wp-content\/uploads\/2026\/11\/panel-production-line-scaled.jpg","type":"image\/jpeg"}],"author":"Filippo Todeschini","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Filippo Todeschini","Est. reading time":"7 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/#article","isPartOf":{"@id":"https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/"},"author":{"name":"Filippo Todeschini","@id":"https:\/\/www.cmc-texpan.com\/en\/#\/schema\/person\/64ab64b9769b69cc3e640424d1b79007"},"headline":"How to optimize a panel production line: a practical guide\u00a0","datePublished":"2026-11-19T14:02:37+00:00","dateModified":"2026-11-19T14:02:48+00:00","mainEntityOfPage":{"@id":"https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/"},"wordCount":1390,"image":{"@id":"https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/#primaryimage"},"thumbnailUrl":"https:\/\/www.cmc-texpan.com\/wp-content\/uploads\/2026\/11\/panel-production-line-scaled.jpg","articleSection":["Products - news"],"inLanguage":"en-US"},{"@type":["WebPage","FAQPage"],"@id":"https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/","url":"https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/","name":"How to optimize a panel production line: a practical guide","isPartOf":{"@id":"https:\/\/www.cmc-texpan.com\/en\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/#primaryimage"},"image":{"@id":"https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/#primaryimage"},"thumbnailUrl":"https:\/\/www.cmc-texpan.com\/wp-content\/uploads\/2026\/11\/panel-production-line-scaled.jpg","datePublished":"2026-11-19T14:02:37+00:00","dateModified":"2026-11-19T14:02:48+00:00","author":{"@id":"https:\/\/www.cmc-texpan.com\/en\/#\/schema\/person\/64ab64b9769b69cc3e640424d1b79007"},"description":"ptimising a wood-based panel production line is not a one-time project \u2014 it is a permanent operational discipline","breadcrumb":{"@id":"https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/#breadcrumb"},"mainEntity":[{"@id":"https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/#faq-question-1795096803229"},{"@id":"https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/#faq-question-1795096804248"},{"@id":"https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/#faq-question-1795096805056"},{"@id":"https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/#faq-question-1795096806270"},{"@id":"https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/#faq-question-1795096807758"}],"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/#primaryimage","url":"https:\/\/www.cmc-texpan.com\/wp-content\/uploads\/2026\/11\/panel-production-line-scaled.jpg","contentUrl":"https:\/\/www.cmc-texpan.com\/wp-content\/uploads\/2026\/11\/panel-production-line-scaled.jpg","width":2560,"height":1920,"caption":"panel production line"},{"@type":"BreadcrumbList","@id":"https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.cmc-texpan.com\/en\/"},{"@type":"ListItem","position":2,"name":"How to optimize a panel production line: a practical guide\u00a0"}]},{"@type":"WebSite","@id":"https:\/\/www.cmc-texpan.com\/en\/#website","url":"https:\/\/www.cmc-texpan.com\/en\/","name":"SIEMPELKAMP","description":"Sorting &amp; Forming","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.cmc-texpan.com\/en\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Person","@id":"https:\/\/www.cmc-texpan.com\/en\/#\/schema\/person\/64ab64b9769b69cc3e640424d1b79007","name":"Filippo Todeschini","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/60bb2c3b5f05bd108b4e5284f41bddb9468c708a0dc0c9dfea02da4c921efac7?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/60bb2c3b5f05bd108b4e5284f41bddb9468c708a0dc0c9dfea02da4c921efac7?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/60bb2c3b5f05bd108b4e5284f41bddb9468c708a0dc0c9dfea02da4c921efac7?s=96&d=mm&r=g","caption":"Filippo Todeschini"},"url":"https:\/\/www.cmc-texpan.com\/en\/author\/siempelkamp-staff\/"},{"@type":"Question","@id":"https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/#faq-question-1795096803229","position":1,"url":"https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/#faq-question-1795096803229","name":"What is OEE and what is a good target for a panel plant?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"OEE (Overall Equipment Effectiveness) is the product of availability, performance rate, and quality rate. A target of 85%+ is considered world-class for continuous panel production lines.","inLanguage":"en-US"},"inLanguage":"en-US"},{"@type":"Question","@id":"https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/#faq-question-1795096804248","position":2,"url":"https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/#faq-question-1795096804248","name":"What is the fastest way to reduce resin consumption without affecting panel quality?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"The fastest path is accurate belt scale calibration combined with Coriolis mass flow meters in the glue kitchen \u2014 eliminating systematic resin over-application caused by metering inaccuracy.","inLanguage":"en-US"},"inLanguage":"en-US"},{"@type":"Question","@id":"https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/#faq-question-1795096805056","position":3,"url":"https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/#faq-question-1795096805056","name":"How does recycled wood content affect production line optimisation?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"Recycled wood requires more intensive cleaning (more stages), may require different blending parameters (higher resin for lower-quality particles), and can increase press factor variability. A robust cleaning system upstream is the critical prerequisite.","inLanguage":"en-US"},"inLanguage":"en-US"},{"@type":"Question","@id":"https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/#faq-question-1795096806270","position":4,"url":"https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/#faq-question-1795096806270","name":"What is the typical return on investment for forming line upgrades?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"Forming line upgrades (EcoFormer SL, closed-loop weight control) typically achieve payback in 12\u201336 months through reduced sanding waste, improved board quality (fewer rejections), and energy savings.","inLanguage":"en-US"},"inLanguage":"en-US"},{"@type":"Question","@id":"https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/#faq-question-1795096807758","position":5,"url":"https:\/\/www.cmc-texpan.com\/en\/2026\/11\/19\/panel-production-line\/#faq-question-1795096807758","name":"How can we identify the biggest source of unplanned downtime in our plant?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"Systematic recording of all downtime events by equipment and cause, over a period of 3\u20136 months, reveals the top downtime contributors (Pareto analysis). In most plants, 20% of equipment causes 80% of unplanned downtime.","inLanguage":"en-US"},"inLanguage":"en-US"}]}},"_links":{"self":[{"href":"https:\/\/www.cmc-texpan.com\/en\/wp-json\/wp\/v2\/posts\/2691","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.cmc-texpan.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.cmc-texpan.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.cmc-texpan.com\/en\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.cmc-texpan.com\/en\/wp-json\/wp\/v2\/comments?post=2691"}],"version-history":[{"count":3,"href":"https:\/\/www.cmc-texpan.com\/en\/wp-json\/wp\/v2\/posts\/2691\/revisions"}],"predecessor-version":[{"id":2696,"href":"https:\/\/www.cmc-texpan.com\/en\/wp-json\/wp\/v2\/posts\/2691\/revisions\/2696"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.cmc-texpan.com\/en\/wp-json\/wp\/v2\/media\/2694"}],"wp:attachment":[{"href":"https:\/\/www.cmc-texpan.com\/en\/wp-json\/wp\/v2\/media?parent=2691"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.cmc-texpan.com\/en\/wp-json\/wp\/v2\/categories?post=2691"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.cmc-texpan.com\/en\/wp-json\/wp\/v2\/tags?post=2691"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}